Liquid Silicone rubber for gypsum molds

Liquid Silicone rubber for gypsum molds

Liquid Silicone rubber for gypsum applications

1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .

Liquid Silicone rubber for gypsum features

Liquid Silicone rubber is two part silicone with general hardness of 22-50Shore A after curing with features ------

(1) High tensile & tear strength 

(2) High duplication times

(3) Low linear shrinkage 

(4) Resistance to high-temperature

(5) Low shrinkage and non-deformation

(6) Resistance to acid-alkali and expansion

Liquid Silicone rubber for gypsum operation instructions

Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes, Otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the mixture into the frame with original gypsum mold slowly .

Shelf life for Liquid Silicone rubber

10~12 months, when stored in a dry & cool place under the room temperature 25.

Packing for Liquid Silicone rubber

1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum

nnecttype="rect" o:extrusionok="f">

For more information , pls feel free to contact Ms Van

Office no. :0086-755-89948294

Mob:86-15813726516

Email :van1006(at)hotmail(dot)com 

Welcome to our website www dot szrl dot net