Platinum cured silicone rubber for tire mold

                             Platinum cured silicone rubber for tire mold

Description of platinum cured silicone rubber

Platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It’s mainly suitable for tire molds making .

Advantage of platinum cure silicone rubber for tire mold

1) Non- shrinkage

2) High tensile an d tear strength with high copy times

3) Exceptional fluidity and good operability (mixing ratio at 1:1 )

4) High temperature resistant in 250 Centigrade

Operation instruction of platinum cure silicone rubber for tire mold

Step One: Take value="100" tcsc="0" unitname="g" w:st="on">100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the mixture into the frame with original mold slowly .

Shelf life for silicon rubber for mold making

8~10months, when stored in a dry & cool place under the room temperature 25.

Packing for silicon rubber for mold making

20kg/drum for part A+ 20kg/drum for part B in one set

200 kg/drum for part A+ 200kg/drum for part B in one set

nnecttype="rect" o:extrusionok="f">

For more information , pls feel free to contact Ms Van

Office no. :0086-755-89948294

Mob:86-15813726516

Email :van1006(at)hotmail(dot)com 

Welcome to our website www dot szrl dot net